CS LogoAssistant chat

Service - Chat with us 24/7!

Service
Across our product range we have Free Shipping and Custom Shipping rates to Metropolitan, Rural and Remote Australia. Please see each product. ALL orders have their shipping confirmed individually before sending your payment confirmation. We have attracted the best Courier rates in the country by using an advanced and efficient internet system - “Smart Send”. This technology allows All Orders, Requests, Quotes to be processed manually to give every Customer the attention and service representative of the quality and technology of Civilstock.
Cart Icon Your Bag is empty 0
4D SYSTEMS - Display Module, Raspberry Pi - SK-32PTU-PI
  • 4D SYSTEMS - Display Module, Raspberry Pi - SK-32PTU-PI
  • 4D SYSTEMS - Display Module, Raspberry Pi - SK-32PTU-PI
  • 4D SYSTEMS - Display Module, Raspberry Pi - SK-32PTU-PI
  • 4D SYSTEMS - Display Module, Raspberry Pi - SK-32PTU-PI Dimensions
  • 4D SYSTEMS - Display Module, Raspberry Pi - SK-32PTU-PI

4D SYSTEMS® Display Module for Raspberry Pi® - SK-32PTU-PI

$113.00

SKU: SK-32PTU-PI

Barcode:

Availability: Many in stock


Quantity:
+

4D SYSTEMS - 3.2" Raspberry Pi Display Module Starter Kit

 

 

 

FREE SHIPPING

 

 

Description

 

SK-32PTU-PI (Starter Kit) includes uLCD-32PTU-PI

 

This item includes the following:

 

- uLCD-32PTU Display Module with Resistive Touch.
- 4D Serial Pi Adaptor
- 2GB microSD Card
- uUSB-PA5 Programming Adaptor
- 150mm 5 way Female-Female jumper cable, for quick connection to another device or breadboard
- 5 way Male-Male adaptor (for converting the Female-Female cable to be Male-Female)
- Quick Start User Guide

 

The uLCD-32PTU-PI is a Raspberry Pi Display Module Pack, which includes a uLCD-32PTU 3.2" LCD Display with Resistive Touch, a 4D Pi Adaptor and 5 way interface cable.

 

The uLCD-32PTU-PI customises the uLCD-32PTU Display specifically for interfacing with the Raspberry Pi, to provide a quick and easy interface without any wiring hassles.

 

The Raspberry Pi Display Module Pack enables a Raspberry Pi user to quickly connect the 4D Pi Adaptor Shield to their Raspberry Pi, connect the 5 way cable between the Adaptor and the Display Module, and be connected in seconds to start programming their new 4D Systems Display.

 

The uLCD-32PTU-PI has a comprehensive ViSi-Genie library written to communicate with the Raspberry Pi, allowing the Visi-Genie events to be easily understood by the Raspberry Pi and users code.

 

Utilises the Raspberry Pi's UART Serial Port.

 

Note:
Please note that the uLCD-32-PTU-PI is not designed to be the primary display for the Raspberry Pi and is programmed using 4D Systems' Workshop 4 IDE

 

For support relating to the Raspberry Pi, please refer to the Raspberry Pi Forum.

 

 

SOFTWARE

 

4D Systems' All New Workshop4 IDE

 

Supports multiple development environments, to cater for different user requirements and skill level.

 

Workshop4 is a comprehensive software IDE for Microsoft Windows that provides an integrated software development platform for all of the 4D family of processors and modules. The IDE combines the Editor, Compiler, Linker and Downloader to develop complete 4DGL application code. All user application code is developed within the Workshop4 IDE.

 

Workshop4 includes four development environments, for the user to choose based on application requirements or even user skill level.

 

 

Designer
This environment enables the user to write 4DGL code in its natural form to program the display module.

 

ViSi - Genie
An advanced environment that doesn't require any 4DGL coding at all, it is all done automatically for you.
Simply lay the display out with the objects you want (similar to ViSi), set the events to drive them and the code is written for you automatically. ViSi-Genie provides the latest rapid development experience from 4D systems.

 

ViSi
This environment is also provided to transform the display module into a slave serial display module, allowing the user to control the display from any host microcontroller or device with a serial port.

 

Serial
This environment is also provided to transform the display module into a slave serial display module, allowing the user to control the display from any host microcontroller or device with a serial port.

 

 

Contents of Shipment

 

- uLCD-32PTU Display Module with Resistive Touch.
- 4D Serial Pi Adaptor
- 2GB microSD Card
- uUSB-PA5 Programming Adaptor
- 150mm 5 way Female-Female jumper cable, for quick connection to another device or breadboard
- 5 way Male-Male adaptor (for converting the Female-Female cable to be Male-Female)
- Quick Start User Guide

 

 

uLCD-32PTU - 3.2" TFT Intelligent Display

 

The uLCD-32PTU is a compact and cost effective Intelligent Display Module packed with plenty of features, ready to become the GUI for your target application, and capable of being an interface controller for a number of applications.

 

Embedded at the heart of the design is the PICASO processor, which is driven by a highly optimised virtual core engine called EVE (Extensible Virtual Engine). An extensive range of hardware and software peripherals have been integrated into the design, to give the user freedom to adapt the module to suit almost any application.

 

The uLCD-32PTU is an elegant combination of a 3.2" (240x320) LCD Screen, audio amplifier and speaker, micro-SD card connector, Lithium Battery Support, along with a group of general purpose input/output pins (GPIO's), including I2C and serial COMMS.

 

The uLCD-32PTU display module serves as a perfect solution to be deployed at the forefront of any product design, requiring a brilliance of colour, animation or images on any application. This PICASO driven Intelligent Display Module is a perfect example of where art meets technology.

 

 

4D Serial Pi Adaptor

 

The 4D Serial Pi Adaptor is a simple adaptor board designed to provide a serial interface in a convienent form-factor, enabling the Raspberry Pi to connect to a majority of the 4D System display modules with a single 5 pin connection.

 

The 4D Serial Pi Adaptor features a pass through header design, enabling existing Raspberry Pi products to connect to the Raspberry Pi, as if this adaptor was not installed. The 4D Serial Pi Adaptor utilises only the serial port on the Raspberry Pi.

 

 

Information and Features

 

3.2" TFT Intelligent Display

 

- Low-cost 3.2" LCD-TFT display graphics user interface solution.
- 240 x 320 VGA resolution, RGB 65K true to life colours, TFT screen with Integrated 4-Wire Resistive Touch Panel.
- Powered by the 4D-Labs PICASO processor (also available as separate OEM IC)
- Easy 5 pin interface to any host device:
- VCC, TX, RX, GND, RESET
- 14KB of flash memory for user code storage and 14KB of SRAM for user variables, or 14KB shared user code and program variables.
- 2 x Asynchronous hardware serial ports (COM0, COM1), TTL interface, with 300 to 600K baud.
- 1 x I2C interface (Master).
- 8 x 16 bit timers with 1 millisecond resolution.
- 13 x General Purpose I/O pins. Supports fast 8-bit parallel data transfer through Upper 8 bits.
- On-board micro-SD memory card socket for multimedia and data logging with SDHC memory card support.
- A SPI compatible micro-SD card is required.
- Lithium Polymer battery support, with built in battery charger and automatic change-over.
- Dedicated PWM Audio pin driven by WAV files from micro-SD card.
- On-board audio amplifier with a tiny 8Ω speaker for sound generation and WAV file playback.
- Built in extensive 4DGL graphics and system library functions.
- Display full colour images, animations, icons and video clips.
- Supports all available Windows fonts.
- A 30 pin header for I/O expansion and future plug-in daughter boards.
- 4.0V to 5.5V range operation (single supply).
- Module dimensions: 56.3 x 80.5 x 15.9mm (including corner plates).
- Weighing ~ 50g.
- Display Viewing Area: 48.60 x 64.80mm
- 4 x corner plates with 2.7mm holes for mechanical mounting.
- RoHS Compliant
- CE Compliant (Modules marked with CE)

 

 

4D Serial Pi Adaptor

 

- Direct IO connection to the Raspberry Pi
- Simple 5 pin serial interface for 4D System display modules
- Raspberry Pi supplied 5V power for Display Module
- Comes with 5 wire ribbon cable if ordered without a display module. Display module itself includes a 5 wire ribbon cable (this is not the programming cable).
- Compatible with Raspberry Pi A, B and B+, Pi2, Pi3. (Does not use the full width of the header on B+/Pi2/P3)

 

 

Specifications and Data

 

DATASHEET - http://www.farnell.com/datasheets/1858366.pdf

 

 

Manufacturer Connection

 

MANUFACTURER'S PRODUCT PAGE - http://www.4dsystems.com.au/product/uLCD_32PTU_PI/

  

4D Systems highly recommends all first time buyers of 4D Systems’ displays, to purchase the Starter Kit when purchasing their first 4D Systems display solution.

 

The Starter Kit provides all the hardware that is required to get the user up and running.

 

Not all development environments and features will be needed by every user, however by purchasing the display solution in a Starter Kit, it ensures that if you want to take full advantage of the 4D Systems display solution and try out each of the 4D Workshop4 Environments, upgrade PmmC/firmware, you can.

 

The Designer environment can utilise every feature of the display, however depending on the user requirements, a micro-SD (μSD) card may not be required. The μSD card is used when displaying images/video/sound, along with datalogging to μSD, and a programming cable is definitely required for downloading compiled code and PmmC/Firmware updates.

 

The ViSi environment is the same as Designer in terms of feature utilisation, but is image based so requires a μSD card, along with a programming cable.

 

The ViSi-Genie environment is also image based, and therefore requires a μSD card and programming cable also.

 

The Serial environment does not require either a μSD or Programming cable to be used, however can utilise both depending on the user requirements. The μSD card can be used for such things as storage of multimedia files and datalogging, and the Programming cable for PmmC/Firmware updates, or changing to one of the other three programming environments.

 

 

Manufacturer's Product Video

 
 

 

 

Manufacturer's Supporting Files - Library

 

4D Systems Supporting Files - http://www.4dsystems.com.au/appnotes

Designed to provide useful information showcasing the spectrum of features that 4D products have to offer, through easy to read documentation supported by illustrative images and sample code extracts.

 

 

Manufacturer's FAQ - Knowledge Database

 

4D SYSTEMS FAQ - http://www.4dsystems.com.au/support/

 

 

Manufacturer's Forum - Community Contributions

 

4D SYSTEMS Forum - http://www.4dsystems.com.au/support/

 

 

 

 

 

Civilstock - Shipping Rates

 

 

Civilstock - Shipping Rates

 

 

Civilstock - Shipping Process Description

 

 

Our products come from many very far away places under many different ways of travel.

 

We have organized our Delivery System for a dedicated staff member to personally process your order for it's Shipping costs, if any are applicable.

 

We then send you a Payment Confirmation for the total of your order which now includes shipping at the best rates in Australia.

 

Of course you can select a Shipping Method from our List when finalizing your Bag but if any doubt at all, please select the Civilstock Office option.

 

Please note: ALL Orders are manually processed always. So, if a shipping option is added to the Bag, there is still no charge, NOT until a payment confirmation is sent by our staff member who has manually checked all parts of your order and is completely satisfied that we are going to deliver your product(s) as inexpensively as possible, and has fully applied all policies of supplier shipping credits to your order.

 

At Civilstock, you will always have the opportunity to decide for yourself.

 

 

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Other Civilstock Products

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)